Fresenius Kabi South Africa is recruiting a Feeder for a contract position based in Port Elizabeth. The opportunity is suitable for candidates who have completed Grade 12 and are interested in gaining experience in a manufacturing and pharmaceutical production environment.

The position focuses on supplying sterilized products to visual inspection lines and supporting activities associated with the inspection process. The successful candidate will be required to follow established production procedures, maintain a clean working environment and ensure that products and batch information are handled accurately.

The position is offered at junior level and no previous work experience is required. Previous experience in a manufacturing environment may be advantageous.

Job Details

Position: Feeder
Reference Number: 260923
Location: Port Elizabeth, Eastern Cape
Work Level: Junior
Employment Type: Contract
Contract Duration: 9–12 months
Salary: Market Related
Experience Required: No previous experience required
Minimum Qualification: Grade 12
EE Position: No
Date Posted: 23 September 2026

About the Feeder Position

The Feeder will support the visual inspection line by ensuring that sterilized bags and other required products are supplied to the relevant production areas. The role requires careful attention to detail because products must be correctly identified, segregated and prepared before being processed through the inspection and packing stages.

The successful candidate will work according to established manufacturing procedures and must comply with applicable Good Manufacturing Practice (GMP) and Good Documentation Practice (GDP) requirements.

The role may also involve assisting with other departmental or factory duties when required, provided that such duties are consistent with the employee’s grade, qualifications and training.

Key Responsibilities

Feeding Visual Inspection Lines

A primary responsibility of the Feeder is to supply visual inspection lines with sterilized bags. Products must be delivered to the correct inspection line and handled according to the required production procedures.

The employee will need to ensure that sufficient product is available for inspection activities and that materials are moved safely and efficiently between designated areas.

Moving Trucks

The position involves pulling trucks from the staging area to the visual inspection line feeder. This requires the employee to move production materials between designated areas while following workplace safety procedures.

Empty trucks must also be removed from the inspection line feeder once the product has been used. Proper movement of trucks helps maintain an organised production environment and supports the continuous operation of the inspection lines.

Batch Verification

The Feeder will be responsible for verifying that the correct batches have been staged for packing and inspection.

Batch identification is an important part of the role because products must remain correctly segregated throughout the manufacturing and inspection process. The employee must pay close attention to batch-specific information and ensure that the correct product is supplied to the appropriate inspection line.

Any discrepancy involving batch information or staged products should be handled according to the applicable workplace procedures.

Checking Product Information

The employee will be required to check the printing on bags to verify that the batch details are correct.

This responsibility requires strong attention to detail because incorrect batch information can affect the handling and processing of products. The Feeder must carefully examine the relevant information before products are supplied to the inspection line.

Staging Products

Products must be staged in designated areas for the visual inspection lines. The employee will ensure that products are placed in the appropriate locations and are ready for the next stage of the production process.

Correct staging helps maintain an organised production environment and supports proper batch segregation.

Supporting Visual Inspectors

The Feeder may be required to relieve visual inspectors when necessary. This means the employee may provide support within the inspection process after receiving the appropriate training and instructions.

The ability to follow procedures accurately is therefore important, particularly when performing duties associated with product inspection.

GMP and GDP Compliance

The position requires compliance with Good Manufacturing Practice (GMP) and Good Documentation Practice (GDP) requirements.

GMP refers to the procedures and standards used to help ensure that products are consistently manufactured and controlled according to established quality requirements.

GDP focuses on accurate and controlled documentation. Employees working in regulated manufacturing environments are expected to follow the relevant procedures when recording, handling and checking production information.

The Feeder must comply with applicable GMP and standard operating procedures in all areas where duties are performed.

Maintaining a Clean Workplace

Maintaining a clean and organised workplace is another important responsibility of the position.

The employee must ensure that the work area remains clean and that products, equipment and materials are handled appropriately. A clean production environment supports workplace safety, quality control and efficient manufacturing operations.

Candidates should therefore be comfortable working in an environment where cleanliness and adherence to established procedures are important parts of daily duties.

Attention to Detail

Attention to detail is one of the key requirements for this position.

The Feeder will work with batch information, product identification, staging areas and inspection-line activities. Small errors in identifying or handling products can have consequences for the production process.

The successful candidate must therefore be able to carefully check information, follow instructions and identify batch-specific details accurately.

Batch Segregation

Candidates must be able to comply with the required batch segregation process.

Batch segregation involves keeping different batches appropriately separated and correctly identified throughout the production process. This helps prevent products from different batches from being mixed or incorrectly processed.

The role requires the ability to recognise batch-specific information and follow the applicable procedures when moving and staging products.

Additional Departmental Duties

From time to time, the employee may be required to perform other duties within the department or factory.

Such duties will be consistent with the employee’s grade, qualifications and training. Flexibility is therefore important, as daily responsibilities may vary according to operational requirements.

Minimum Requirements

Applicants must meet the following minimum requirement:

• Grade 12 or equivalent qualification.
• No previous work experience is required for this opportunity.

Candidates who have previous experience working in a manufacturing environment may have an advantage, although manufacturing experience is not listed as a mandatory requirement.

Medical Eye Test and Inspection Qualification

The ideal candidate should be able to pass the required medical eye test.

Candidates should also ideally be able to pass the Standard Inspection qualification test with a minimum score of 80%.

These requirements are relevant to the nature of the work because the position involves supporting visual inspection activities and checking product and batch information.

Candidates should be prepared to complete the relevant assessments or examinations required for the position.

Skills and Personal Attributes

The role requires candidates who can work carefully and consistently in a structured production environment.

Important attributes include:

• Strong attention to detail.
• Ability to identify batch-specific information.
• Ability to follow standard operating procedures.
• Ability to comply with GMP requirements.
• Ability to comply with GDP requirements.
• Understanding of batch segregation procedures.
• Ability to maintain a clean and organised workplace.
• Ability to follow instructions accurately.
• Ability to work as part of a production team.
• Willingness to perform different duties within the scope of the position and training.

No Experience Required

One of the notable aspects of this opportunity is that previous work experience is not required.

This makes the position potentially suitable for Grade 12 candidates who are looking to enter the manufacturing or pharmaceutical production sector. Previous manufacturing experience is advantageous but is not listed as a minimum requirement.

Candidates should still understand that the role involves working in a regulated production environment where quality, accuracy, cleanliness and compliance with procedures are important.

Contract Duration

The position is offered on a contract basis for a period of approximately 9 to 12 months.

The contract nature of the position should be considered by applicants before submitting an application. The vacancy is classified as a junior-level opportunity.

Salary

The salary is listed as Market Related.

No specific monthly salary amount has been provided in the vacancy information. Market-related remuneration generally means that compensation is determined according to the company’s applicable salary structure and the requirements of the position.

Employment Equity

The vacancy is indicated as not being an EE position.

Location

The Feeder position is based in Port Elizabeth, Eastern Cape.

Applicants should consider the location of the workplace and their ability to report to the workplace as required before applying.

Reference Number

Applicants should use the correct vacancy information when applying.

Reference Number: 260923

Using the correct reference number can help ensure that the application is associated with the intended vacancy.

Who Can Apply?

The opportunity may be suitable for candidates who:

• Have completed Grade 12.
• Are interested in manufacturing or pharmaceutical production.
• Have strong attention to detail.
• Can work according to standard operating procedures.
• Can comply with GMP and GDP requirements.
• Can identify and verify batch information.
• Are able to maintain a clean working environment.
• Can work with production materials and staging processes.
• Are willing to complete the required inspection qualification.
• Can pass the required medical eye test.
• Are available for a 9–12 month contract position in Port Elizabeth.

Candidates with previous manufacturing experience may have an advantage, although such experience is not required.

Important Information Before Applying

Applicants should carefully review the vacancy requirements and ensure that the information provided in the application is accurate.

Grade 12 is the minimum stated qualification. Candidates should also be aware of the medical eye test and Standard Inspection qualification test requirements.

The position involves working with sterilized bags, production batches, visual inspection lines and manufacturing procedures. Accuracy and compliance are therefore important aspects of the job.

Applicants should also ensure that all required application information and supporting documentation are provided according to the employer’s instructions.

Conclusion

Fresenius Kabi South Africa is offering a junior-level Feeder opportunity in Port Elizabeth on a 9–12 month contract. The position involves supplying sterilized bags to visual inspection lines, moving trucks, verifying batches, checking product printing, staging products and supporting visual inspection activities.

The opportunity requires a minimum of Grade 12, while previous work experience is not mandatory. Previous manufacturing experience is considered advantageous. Candidates should ideally be able to pass the medical eye test and achieve at least 80% in the Standard Inspection qualification test.

The role is particularly focused on attention to detail, batch segregation, accurate identification of product information, GMP and GDP compliance, cleanliness and adherence to standard operating procedures.